THIS IS A CUSTOM KIT BUILT TO ORDER. NO REFUNDS
We developed this kit while doing a customers truck. We had a lot of request for these parts because of the popularity of this type of truck. This kit is designed around a 2wd 3/4 ton Ram (1994-1998) spindle. We picked up our spindles from a local junk yard fairly cheap with brakes and everything. It is Recommended that you move the gear box in towards the inside of the frame. We have build pics of this linked below in the install pics. The Upper control arms are built from 1 1/4 DOM tubing with a .188 wall thickness. The Lower control arms are built from 1 1/2 DOM tubing with a .188 wall thickness. This is one of the more difficult kits when it comes to installation. The steering part is the most intricate.
Due to the Weight of the Cummins Motor this kit was designed to run the 3200Lb airbag (For Assistance ordering this bag please contact us 817-473-6669)
LINK TO INSTALL: https://nfamusgallery.smugmug.com/TECH-PHOTOS/1ST-GEN-DODGE-250350-FRONT-KIT/
INCLUDES:
2 - Upper Control Arms
2 - Lower Control Arms
2 - Upper Bag Plates with gussets
2 - Upper/Lower Shock Mounts
8 - Upper Control Arm Tabs
4 - Lower Control Arm Tabs with gussets
2 - Lower Control Arm Tabs (Work with part of factory frame)
8 - Polyurethane Bushings
4 - Ball Joints (Upper/Lower)
Misc Gussets for steering box
